CERTIFIED
Report #CQ-2024-78432 | ISO-17025-FI-001
QUALITY ANALYSIS REPORT

Every Pour. Every Test. Analyzed.

AI-powered laboratory-grade analysis verifies concrete specifications, tracks test results, and ensures full compliance documentation.

Strength Test PASS
Slump Test PASS
Mix Verified PASS
Request Lab Demo View Sample Reports
CORE SAMPLE ANALYSIS Sample #CS-2024-001
Surface Layer Density: 2.4 g/cm3
Mid Section Porosity: 2.1%
Core Center Strength: 42.5 MPa
Base Layer Hydration: 98%
All Tests Passed
Grade C40
TEST RESULTS

Laboratory Analysis Results

Real-time test monitoring with automated compliance verification

PASS

Compressive Strength

Cylinder 150x300mm

Result: 42.5 MPa
Required: >40 MPa
100% Compliant
PASS

Slump Test

Fresh Concrete

Result: 120mm
Required: 100-150mm
100% Compliant
PASS

Air Content

Fresh Concrete

Result: 4.2%
Required: 3-6%
100% Compliant
PASS

Temperature

Fresh Concrete

Result: 28C
Required: <32C
100% Compliant
14% Portland Cement
28% Fine Aggregate
42% Coite Aggregate
8% Water
8% Admixtures
MIX COMPOSITION

Chemical Composition Analysis

AI-verified mix design ensures every batch meets exact specifications

Portland Cement
14%
Fine Aggregate
28%
Coite Aggregate
42%
Water
8%
Admixtures
8%
Mix Design Verified Matches approved specification C40-W/C-0.45
QUALITY INCIDENTS PREVENTED

Analysis Reports That Saved Millions

Real issues caught by AI-powered laboratory monitoring

SAMPLE ID CQ-78432-A
06:45
Test Type: Mix Design Verification
Finding: Incorrect cement content detected
Action Taken: Batch rejected, correct mix ordered
Potential Cost Avoided SAR 4.5M
SAMPLE ID CQ-78433-B
09:30
Test Type: Workability Analysis
Finding: Slump outside tolerance range
Action Taken: Water-cement ratio adjusted on-site
Potential Cost Avoided SAR 2.8M
SAMPLE ID CQ-78434-C
14:15
Test Type: Thermal Monitoring
Finding: Mass pour temperature exceeding limits
Action Taken: Cooling protocols activated
Potential Cost Avoided SAR 8.2M
SAMPLE ID CQ-78435-D
16:50
Test Type: Curing Verification
Finding: Moisture loss above threshold
Action Taken: Enhanced curing applied
Potential Cost Avoided SAR 3.5M

Laboratory Performance Metrics

Real-time quality monitoring across all project sites

50K+ Samples Analyzed
99.2% Compliance Rate
60% Fewer Rejections
100% Documented

Start Your Quality Analysis

Get laboratory-grade concrete quality monitoring for every pour on your project.

Real-time test monitoring
Automated compliance reports
Full batch traceability
Request Lab Demo
FAQ

Frequently Asked Questions

Search our knowledge base or browse popular topics below

Our drone systems deliver centimeter-level precision, ensuring every dataset is reliable and ready for engineering or compliance use. We use RTK GPS and ground control points to achieve survey-grade accuracy.

AccuracyTechnology

Yes, we operate nationwide with certified pilots and equipment positioned across all major regions including Riyadh, Jeddah, Dammam, and remote industrial areas. Our team can deploy within 24-48 hours.

Coverage

We use proprietary computer vision models trained on millions of industrial images. Our AI detects PPE violations, safety hazards, and anomalies in real-time with sub-second response times.

Technology

Absolutely. Our platform is camera-agnostic and works with any IP camera, existing CCTV infrastructure, or new installations. Setup takes less than 30 minutes per camera with our plug-and-play solution.

Technology

Enterprise customers get 24/7 dedicated support with guaranteed 15-minute response times. All plans include onboarding, training, and access to our customer success team.

Support
export const prerender = true;